These wheels have crowned threads, this means there's less
surface on the floor, making any load easier to move and turn.
Made of high quality cast iron these wheels provide high
performance, abrasive resistant and long wearing life. Four inch
wheels and larger are furnished with fittings for pressure
lubrication.
Load Range (in pounds)
300 - 3000
Wheel Sizes (in inches)
2 - 12
Bearing Type
Plain, Roller bearing.
Considered one of the most rugged type in the industry, these
superior service wheels will withstand the most severe treatment
anywhere. Ductile iron material has a tensile strength of 40,000
psi, They'll handle loads up to 4,000 lbs. Available with
hardened alloy steel roller bearings or precision tapered
bearings. Threads are fully machined, so that they will
distribute loads over the entire surface. Protects floors while
providing a smooth ride. They almost never break, chip, or crack,
even under the heaviest impact loading,
Load Range (in pounds)
3,500 - 4,000
Wheel Sizes (in inches)
5 to 12
Bearing Type
Plain, Roller bearing, Tapered Roller Bearing
V-Groove Wheels are just what the name implies. Designed to
move on inverted angle iron tracks. You can move very heavy loads
on these tracks without destroying floor surfaces. These same
wheels can run on regular floors too. When they're run on tracks,
they offer a most popular and low cost method of taking loads off
the plant floor and establishing production line flow. Look to
this type wheel where you encounter acute impact, or where
temperatures can crystallize other kinds of wheels. V-Groove
wheels, in either semi-steel or ductile iron, come with standard
hardened alloy steel roller bearings. Zerk fittings for
lubrication are provided in all wheel hubs.
Load Range (in pounds)
3,500 - 4,000
Wheel Sizes (in inches)
5 to 12
Bearing Type
Plain, Roller bearing, Tapered Roller Bearing
Here's a wheel with a softer rubber tread that's permanently
bonded to a hard composition rubber hub. You'll find these wheels
working successfully for light loads, where noise is a factor or
where floors are rough. Extremely quiet and easy rolling, they're
installed with permanently lubricated sleeve bearings that
require no maintenance. They also provide resistance to impacts,
while resisting oil, water and most chemicals.
Load Range (in pounds)
100 to 400
Wheel Sizes (in inches)
2 to 6
Bearing Type
Plain, Roller bearing, Delrin Bearing, Self Lube Bearing
A solid hard rubber wheel. A low cost easy rolling wheel that
offers good floor protection. Quieter than steel wheels and
highly resistant to chemicals, grease, oil, mild acids and
alkali's. Strong and chip resistant, they're non-marking,
non-sparking and easy swiveling. They offer higher load ratings
than the soft tread rubber wheel.
Load Range (in pounds)
145 to 650
Wheel Sizes (in inches)
2 to 6
Bearing Type
Plain, Roller bearing, Delrin Bearing, Self Lube Bearing
These wheels a compounded of top quality rubber, vulcanized
to semi-steel centers. They're built to last. They combine
resilience with total wear-ability, matching and sometimes
surpassing synthetic rubbers in grease resistance. Hardened steel
roller bearings have hardened steel outer races for longer wear.
The semi-steel wheel centers are thoroughly powder coated black
to protect against outside corrosion and contamination. They're
equipped with fittings for pressure lubrication.
Load Range (in pounds)
170 to 1,500
Wheel Sizes (in inches)
3 to 18
Bearing Type
Plain, Roller bearing
The injection molded polyolefin wheel is recognized as the
"easy roller" lasting performer. Protects floors,
non-marking. Withstands impacts. Superb resistance to both water
and chemicals makes this wheel the solution for wet and sloppy
conditions. More durable and less costly than other wheels of
comparable capacities. Operating temperatures from - 20F. up to
+230F. Wide selection of bearing type and load ratings to meet
most requirements. Consider this type for food processing,
warehousing, manufacturing and office operations.
Load Range (in pounds)
150 to 650
Wheel Sizes (in inches)
2 to 8
Bearing Type
Plain, Roller bearing, Delrin Bearing
The new development in extremely high load capacity synthetic
rubber wheels. A truly versatile type, for they can be used on
virtually any floor surface. Application temperature range from -
30F to + 180F., and not affected by oils or greases and most
industrial solvents. Constructed of polyurethane 90 Durometer
Shore A. Their non-marking, non-staining qualities combine with
their resistance to impact, shock, abrasion. Outwears rubber four
to ten times with twice the load capacity. Polyurethane also
deadens sound with the floor-protecting qualities of rubber.
Designed and built with quality and performance in mind. These
wheels are tougher, more cost efficient. Resist scuffing,
chunking out. They retain their new look, start easily, run
quietly and roll effortlessly.
Load Range (in pounds)
290 to 3,000
Wheel Sizes (in inches)
3 to 12
Bearing Type
Plain, Roller bearing
Here's a most economical wheel for most general purpose
applications. Used for high capacity requirements, this type is
composed of macerated canvas that's impregnated with phenolic
resins. Operates more quietly than steel, with the same capacity
of metal. Rolls easily, yet protects floors. Resists shock, water
and oil. Rated at 90 Shore D hardness, able to withstand - 50F.
to + 250F. continuous temperatures.
Load Range (in pounds)
250 to 3,500
Wheel Sizes (in inches)
3 to 12
Bearing Type
Roller bearing, Delrin Bearing
Solid center. Not pressurized, cushioned rubber-tired wheels.
They're quiet, easy operating, completely protecting all types of
floors. With these wheels you can get the most traction on soft
ground surfaces.
Load Range (in pounds)
100 to 350
Wheel Sizes (in inches)
6 to 12
Bearing Type
Roller bearing, Self Lube Bearing, Ball Bearing
Like an auto tire, the full pneumatic wheels are inflated for
extra cushion and roll-ability. Great for rough terrain. They
provide extra versatility for pulling up stairs and for over
curbs.
Load Range (in pounds)
350 to 700
Wheel Sizes (in inches)
8 to 12
Bearing Type
Roller bearing, Ball Bearing
| On
line Catalog | Products |
Home page | Specials |
About | News
letter | Site Map |
Advanced Handling Services
Toll Free (888) 376-5020 Fax (800) 563-6767